CHILDREN'S ROOM
If you are young parents, then there should be a cozy and beautiful room for the child nearby. When decorating a nursery, it is important to realize that the green…

Continue reading →

HOW TO CHOOSE A BAR CHAIR (part 1)
In modern interiors, it has become fashionable to install bar counters for zoning the space, which is especially true in studio apartments, where the dining area is combined with the…

Continue reading →

STONE FLOOR - BEAUTIFUL AND RELIABLE (part 1)
Everyone who at least once independently made repairs in the apartment or built another room can rightfully call himself a master. By searching for the necessary information on the construction…

Continue reading →

HOW TO CHOOSE DOORS AND BATHROOM DOORS (part 6)

WHICH CASTLE TO INSTALL ON THE BATHROOM DOOR
Let’s start with the simplest latch. It is economical and familiar, easily applied to the surface. No through hole required. We do not recommend installing the latch in apartments where there is a small child, or do it as high as possible so that he cannot lock himself inside.

A plumbing wrap is a common but simplified mortise lock. Latch and tongue included. You close the door – it flies out and stops the mechanism. The wrappers have a reasonable price, but the installation will take a little more time, because you have to work with a drill.

Knob handle plus wrap – use often and for a long time. At the level of constipation, a spherical handle is installed that adjusts the position of the latch. Set the handle vertically and the door will lock, it will not be possible to open it from the outside. For installation in the canvas, 2 holes are made – through and end.

WHAT ARE THE MOST STRONG AND STRONG HINGES
Loops have a hard time – in every sense. The weight of a solid door can reach 40 kg or more. The load increases due to frequent opening and high humidity, so everything is important in the hinges – material, protection, build quality.

Stainless steel or brass, as well as nickel-chromium plating will help fight corrosion in high humidity environments.

Door to the bathroom with a wrap and a magnetic latch Door to the bathroom with a wrap and a magnetic latch

By design, the loops are divided into 3 types.

The simplest are card. They are cheap, fastened to self-tapping screws by way of lining on adjacent ends.

Mortise loops look like them. They are not immediately applied to the surface of the ends, but they are cut out at the points of attachment of the recess of the same thickness, the slats are inserted into them and only after that they are fixed with screws. The method is more time consuming, but advantageous in terms of strength.

The most beautiful and expensive are hidden loops. Depressions are made at the end, parts of accessories are inserted into them. The sophisticated mechanism provides more options for adjusting the web in three directions. The hinges remain inside, they are practically invisible on any side, and this gives the design an even more spectacular appearance.

Door to the bathroom with a wrap and a magnetic latch Door to the bathroom with a wrap and a magnetic latch

HOW QUALITY THE DOOR IS INSTALLED – HOW TO DETERMINE
The durability of the door by 50 percent depends on the quality of assembly and installation. When buying, carefully inspect the seams between the frame and panels, the gap between the stand parts and the crossbars. Make sure that the glass elements do not “walk” in the grooves, the fastening of glazing beads and baguette is done in good faith.

Look how neatly the sealant is glued, if it comes out in places. Tap on the canvas, shake it lightly. Any sound or knock should alert you.

After installation, check the level for horizontal and vertical position. Open the door, set the canvas at an angle of 45 degrees to the wall. If the installation is carried out without errors, it will not close, but will remain in the same position. Twist the knobs, check the smoothness of the course of constipation.

Now once again check the integrity of the door cover – if the master damaged it during the work with a hammer, milling cutter, drill, screwdriver. Make sure that the integrity of the veneer (films, enamels, etc.) is not violated, only now you can sign the act and accept the work.

CURTAIN ON THE DOOR (part 1)
Since ancient times, curtains in the interior were used not only as window decorations, but also as doors. The style and models of curtains have changed over time. In addition,…

...

HOW TO CORRECTLY PHOTO WALLPAPERS (part 4)
WALL MARKING Lay out the photo wallpaper on the floor, combining their edges so that you get a single picture. On the wall, they should match as accurately as possible.…

...

HOW TO MAKE A BEAUTIFUL REPAIR IN THE APARTMENT(part 1)
 It is important to make your apartment not only comfortable, but also beautiful. However, at first glance, this may seem very difficult. How to start this? Where to begin? How…

...

HOW TO CHOOSE DOORS AND BATHROOM DOORS (part 4)
HOW DO THE “BEHAVIOR” OF THE DOORS IN THE BATHROOM VENTILATION GRILLE, TOWEL DRIVER INFLUENCE? Does the desire to protect the bathroom door keep you awake? Try to use preventive…

...