HOW TO CHOOSE DOORS AND BATHROOM DOORS (part 4)
HOW DO THE “BEHAVIOR” OF THE DOORS IN THE BATHROOM VENTILATION GRILLE, TOWEL DRIVER INFLUENCE? Does the desire to protect the bathroom door keep you awake? Try to use preventive…

Continue reading →

HOW TO CHOOSE DOORS AND BATHROOM DOORS (part 1)
Interior doors to the bathroom are not made of brick and concrete. They are not cast from iron; they are not cut from marble and malachite. All that you see…

Continue reading →

HOW TO ORDER PHOTO WALLPAPERS THROUGH THE INTERNET
Ordering photo wallpaper via the Internet gives the buyer an advantage, since in online stores the assortment is much wider and products are customized to individual requirements. You can independently,…

Continue reading →

BATHROOM SCREEN (part 3)

AN ANGULAR BATH

If your bathtub has a non-standard rectangular shape, then the screen can be made to fit the angle. For this, you can also use drywall. The frame is made of a metal profile. Incisions are made on it, and then any shape is attached to it. In this case, 2 similar profiles should be made. To strengthen the frame, vertical profiles must be mounted. Also, the frame is installed with a small indentation from the edge of the side of the bath. This will allow to install the facing material (tile) on one level with the bathroom.As for the drywall itself, when screwing it, it is important to carefully give it a curved shape. There are two options for how to do this. The first is to make cuts on the drywall with the same pitch and bend it gently. Also, the top layer of cardboard can be wet and put at a slight angle to the wall. Gradually, under its mass, it will acquire the desired shape.

Note!
The first option is more practical if the bending angle is too large.

SLIDING SCREEN

This type of screen also has its own distinctive features. For example, finished sliding products are on sale today. However, not in all cases they fit the size of a bathtub already purchased and installed. Moreover, for acrylic bathtubs often come in a set of acrylic screens that are suitable exclusively for a specific model of the bathtub. But in this case, the screen turns dull. Such sliding products are not made. Therefore, we suggest you consider the option of manufacturing a sliding screen based on the finished design.

Acrylic bathtub sliding screenAcrylic bathtub sliding screen

To do this, you must have a guide along which the door will move. You will also need to cut the panel into two parts. One of them can be motionless, and the second mobile. However, both parts can be movable. In this case, the guide should have two lines for moving the doors. Thus, a frame is made on which the guide should be fixed under the side of the bath and on the floor. A guide is mounted on it and doors are installed. Without fail, handles are attached to the door, for which it will be possible to move the door. In this case, you can make a sliding plastic screen.

FEATURES OF RATIONAL USE OF RESIDENTIAL AREA
At all times, one and two bedroom apartments are in demand. But most owners of "small size" is faced with the problem of placing things. There is not enough living…

...

BATHROOM SCREEN (part 2)
FROM BRICK If you are a supporter of capital construction, then the screen for the bath can be made of brick. However, in this case, further cladding is required. To…

...

HOW TO CHOOSE DOORS AND BATHROOM DOORS (part 6)
WHICH CASTLE TO INSTALL ON THE BATHROOM DOOR Let's start with the simplest latch. It is economical and familiar, easily applied to the surface. No through hole required. We do…

...

COMBINING GREEN COLOR IN THE INTERIOR (part 2)
Of course, when the hallway is large, it is easier to adhere to the planned style in it, but in a small room it will be relevant to use a…

...